Strong adhesive properties on many surfaces

Our Body Shop Sealant

C

Structure Adhesives, possess high strength and absorb external impacts, garner the attention of the industry. These car body adhesives ensure passenger safety.

BPR sealer reinforces the rigidity of outer panels and Anti-flutter can be applied on impact bars inside doors, hoods and trunk lids. Hem-flange adhesives attach inner and outer panels.

DID YOU KNOW ?

Technical values and information can be changed by customer request

  • Structure Adhesive

    A STRONG BOND

    Structure Adhesive is an epoxy based 1K adhesive material. This adhesive substitutes welding processes, and has high level of adhesion strength. It is applied on area which requires improved adhesion and above standard impact strength. The material has good compatibility with anti-rust oil, and no negative interactions with e-coats for further processes.

    • BENEFITS
    • COMPATIBILITY
    • Advanced impact strength
    • Excellent adhesion, and corrosion stability
    • Opportunity to reduce or delete welding processes
    • Good compatibility with many types of e-coats & antirust oil
    • Applicable with GI, CR, EG steel panels
    • Customer Applicable specification: MS715-60, GMW 15200
  • Hem-Flange Adhesive

    C.S. HEMMING ADHESIVE

    C.S. Hemming adhesive is an epoxy based, black colour paste type material. It contains a latent curing agent, additives, glass beads, etc. This is 1K material, and similar to contemporary hem-flange adhesive with a property of impact bearing strength. It has excellent adhesion on steel with anti-rust oil, and the adhesion is actualised by passing through e-coat oven.

    • BENEFITS
    • COMPATIBILITY
    • Advanced impact bearing strength
    • Good adhesion and corrosion stability
    • Minimal difference on application with common hem-flange adhesives
    • Excellent sag and sliding performance
    • Applicable with GI, CR, EG steel panels
    • Customer Applicable specification: MS721-32 Type”D”
  • Anti-Futter Adhesive

    THE SEALER OF AL SEALANTS

    Mastic Sealer is a synthetic rubber based sealer material which has a good filling properties and corrosion resistance. It is designed to applied at doors, roof, hood, in specific, the gaps between inner & outer panel.

    The material is cured through e-coat oven, and it has a property of paste before curing processes. Depending on the customer request, various lap-shear strength and foaming rate would be achievable.

    • BENEFITS
    • COMPATIBILITY
    • Good performance at reducing noise from vibration
    • No shape changes of outer panel after curing process
    • Excellent adhesion and lap shear strength
    • Meets wide range of lap shear strength & expansion rate
    • Applicable with GI, CR, EG steel panels
    • Customer Applicable specification: MS721-34, GMW14874
  • Body Panel Reinforcement

    BPR sealer is mainly from epoxy resin. It can be used with robots and it hardens by drying in body shop process. It is applied for reinforcing and damping of steel sheet

    • BENEFITS
    • COMPATIBILITY
    • Applicable to curved areas
    • Excellence in steel sheet by using spray
    • Local reinforcement of automotive shells and noise reduction
    • Applicable with CR steel panels
    • Customer Applicable specification: MS721-33
  • Spot Weld Adhesive

    THE PERFORMANCE SEALER

    Spot weld sealer is a Synthetic rubber based black one-component paste product. To prevent the degradation of the SPOT welding, it comprises with additives of conductivity. This product can apply in various steel plate and has a performance at protecting corrosion.

    • BENEFITS
    • COMPATIBILITY
    • Excellent weldability
    • Excellent corrosion protection
    • Applicable with GI, CR, EG steel panels
    • Customer Applicable specification: MS721-33
  • Pre-Cured Sealer

    COST REDUCTIVE SEALER

    Pre cured sealer is a PVC based one-component paste type product. It is applicable at Door, Roof and T/G. Through removing or reducing the paint shop sealer process. This product allows to achieve reduced processing in car manufacturer. Ultimately, it reduces costs in terms of complete manufacturing process.

    • BENEFITS
    • COMPATIBILITY
    • Excellent adhesion and lap shear strength
    • Excellent adhesion at steel plates with various oil type
    • Excellent protection on corrosion
    • Applicable with GI, CR, EG steel panels
    • Customer Applicable specification: MS715-64